|
"Eco One" Spa chemical free water treatment supplies since 1997 |
A $95.70 Value EcoOne - 6 month kit
EcoOne Monthly: Eco One Monthly is the safe, nontoxic core of the EcoOne system that naturally solves most spa water treatment problems and dramatically reduces spa maintenance.
|  $14.95 Buy Now Ideal addition for Spa maintenance and is easy to use. FilterONE™ penetrates and cleans deep inside the fibers of your filter without the use of harsh acids or bleach. Our proprietary wetting agents and alkaline cleansers throughly clean filter cartridges without leaving residue that can cause foaming or alter water chemistry. FilterONE's ultra-concentrated formula is fast acting and economical with up to 15 uses per bottle. Regular use helps assure a clean, clear spa.
|  $14.95 Buy Now A necessity - to extend the life of your Spa plumbing. jetONE™ (pipe cleanser) utilizes a proprietary blend of alkaline cleansing agents and non-foaming surfactants to penetrate deep inside your whirlpool or spa’s plumbing and equipment to scrub away biofilm and organic, mineral and chemical contaminants. jetONE™ even helps to ‘restart’ rotating jets by eliminating contaminants that clog them. jetONE™ will not cause excessive foaming.
| ONE Shock SANITIZER NOW AVAILABLE!!!!!  $19.95 Buy Now $19.95 -- 68 Sanitizing Packets 'ONE ShockTM' is the convenient, 'no touch' way to deliver proven sanitizer and shock in ONE pre-measured dose. ONE dissolving packet of 'ONEShockTM,' is pre-measured to deliver a sanitizing level of product to the average-sized consumer hot tub without
|
Problem | Solution | | Cloudy Water | - clean cartridge filter with FilterOne - shock spa with ONEShockTM, dichlor or non-chlorine shock (allow 24 hours for product to 'catch up' and clean filter)
- increase filtration cycle
- increase sanitizer level
- check pH (7.2 – 8.2) and alkalinity (80 – 120)
- clean cover with ecoONE® Shell and Liner Cleaner – rinse completely
| | Foamy Water | Almost always caused by the introduction of soaps to the spa.
-see page 6 (Always / Never)
- follow “cloudy water” solutions
- discontinue use of filter cleansing products other than FilterONE®
- run spa with cover off and jets and blowers on full – scoop out foam.
- add two caps full ecoONE® Enzyme Active Filter Booster to filter compartment, set spa to max filtration cycle and allow product to work for 24 hours.
| | Green Water | Algae (unlikely in covered spa)
- shock spa with ONEShockTM, dichlor or non-chlorine shock
(allow 24 hours for product to work, then clean filter)
OR
Dissolved coper present in water.
- refill spa using ecoONE® Spa Pre-filter
- use a product such as “Metal Gone” and clean filter after 24 hours.
|
Brown /Black / Orange Water | Dissolved iron in water
- follow instructions for “Green Water”
OR
ecoONE® has loosened contaminant buildup in plumbing.
- on rare occasions, the JetONETM cleansing process does not completely remove all contaminants from plumbing. Cleanse spa with JetONETM, drain and refill.
| | Yellow Water | Generally left over from biguanide conversions.
- shock spa with ONEShockTM, dichlor or non-chlorine shock
(allow 24 hours for product to 'catch up' and clean filter)
- If yellow water persists, you may have to repeat the JetONETM cleansing process
| | Itching /Rashes | - shock spa with ONEShockTM, dichlor or non-chlorine shock
(allow 24 hours for product to 'catch up' and clean filter)
OR
- if itching or rashes persist, you may have a skin issue that requires medical attention. Most ecoONE® users find that, when used as directed, ecoONE® solves their itching and rashes – DO NOT UNDER-SANITIZE your spa – this can make the problem worse.
| | Still need help? | ecoONE® Customer Support:
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
or call: 877-492-8123 |
|
