FREE DURING DECEMBER WITH ANY PURCHASE - 32 fl oz bottle of EcoOne Baby's Nursery and Playroom Spray. A specially formulated, nontoxic cleaner that is intended for use on a variety of surfaces. It is powerful enough to remove grimy dirt from almost any surface while at the same time mild enough that no damage occurs to that surface. The product is completely non-irritating and safe to use around children and pets. Highly concentrated, product can be diluted as much as 4:1 for general household cleaning. Use Directions:
Simply spray on the surface and wipe clean with rag or paper towel. For especially difficult residues, reapply product and wait for several minutes before wiping. Attributes:
- Removes dirt with minimal scrubbing
- Cleans wood without affecting the shine
- Safe to use on furniture, including leather
- Non-irritating
- Safe around children and pets
- No smeary residue
- Mild, pleasant scent
- Non-abrasive, won’t damage surfaces
- Biodegradable, won’t harm environment
- Contains no chlorine or ammonia
- Contains no heavy metals or other toxic substances
- Low foaming
EcoONE® QUICK START GUIDE: 1) Remove and clean cartridge filter with FilterONETM. 2) If necessary, use existing water to deep-cleanse your spa for 1 to 24 hours using approximately 4oz. (113g) of JetONETM Fast Acting Spa Cleanser.
BIGUANIDE NOTE: When switching from a biguanide product,
drain and refill spa before cleansing and replace cartridge filter.
NEW SPAS: New spas should be filled and cleansed before starting ecoONE® as manufacturer 'wet testing' may cause buildup of mold, or other contaminants.
3) Drain spa and rinse surfaces with fresh water. Clean spa shell and cover. (we recommend ecoONE® Shell and Liner Cleaner) Refill and drain spa 'well' (center of spa) 2 to 3 times to assure removal of all contaminants from plumbing. NOTE: NEVER use household cleaners to clean your spa. They can damage the shell and cause foaming. 4) Refill spa and heat to operating temperature. Adjust pH, alkalinity, calcium hardness ONLY if necessary.
pH Range: 7.2 – 8.2
Alkalinity: 80 - 120
Hardness: 200+
| Origin of Warm Water Therapy Thermal spas have been used for centuries as an integral part of general health and well being. Throughout the ages, the Greeks, Romans, Japanese, and many other cultures have realized its many benefits to the spirit, mind and body.. Thermal spas were frequently built near natural volcanic vents, where the water from hot springs was diverted and contained in large public baths. Hot springs were not always available, so spas were built with furnace rooms that were used to heat the water, but only the wealthiest could afford to build and maintain their own private spa. Today, the ancient thermal spa is re-created in modern hot tub spas that continue to provide many of the same health benefits simply by combining fresh, heated water with the massaging action of powerful jets. The best news is that Thermo Spas makes it possible for everyone to afford their very own private spa. The term Spa has its roots in ancient Latin, but it is generally used today to describe the addition of jets in hot tubs for massage therapy. Today, the terms Hot Tubs and Spas are often used interchangeably, and you will frequently see the phrase Hot Tub Spa used to indicate that a heater and massage jets are built-in. The spa industry of the 1990’s continued to grow by discovering the added benefits of health and wellness. Through advanced technology and improved products, modern spas provide tremendous health benefits that were originally found in the hot springs of the ancient thermal spas. The medical profession now credits hot tubs in helping patients with many ailments, including arthritis, stress, sleep disorders, diabetes, and muscle and joint pain, to name a few.
Remember: There are 3 things to filter out of the water; Solids, Liquids and Semi-Solids. JetONE
Fast Acting Plumbing Cleanser for Whirlpools and Spas jetONE™ utilizes a proprietary blend of alkaline cleansing agents and non-foaming surfactants to penetrate deep inside your whirlpool or spa’s plumbing and equipment to scrub away biofilm and organic, mineral and chemical contaminants. jetONE™ even helps to ‘restart’ rotating jets by eliminating contaminants that clog them. jetONE™ will not cause excessive foaming. An excellent companion product to the ecoONE® spa treatment line. Hot Tub/Spa Instructions:
Remove cartridge filter.
Add 1/2 bottle (4 oz. / 113g) of jetONE to existing water.
Run jets on full for one hour.
Drain and throughly rinse spa.
Repeat before every drain and refill.
(For first use or heavily contaminated spas use entire bottle and allow to work for up to 24 hours.) Whirlpool Bath Instructions:
Fill whirlpool at least 2 inches above suction intake with hot water. Add 4 caps full of jetONE. Circulate on high for 5 to 30 minutes and drain. Refill tub with hot water, circulate jets and drain. Repeat monthly or as needed.
VERY HARD or WELL WATER: Many initial water quality issues can be solved by filling your spa using the ecoONE® Spa Pre-Filter. If your water is excessively hard, you may need to use a stain and scale control product.
5) Add minimum recommended amount of sanitizer or one dissolving packet
of ONEShockTM(where available) per 250 gallons (950 liters)
(see “SANITIZERS” page: 5) 6) With jets and blowers running, and full bottle of ecoONE monthly to spa. For heavily used spas, we recommend adding ½ to 1 cap full of ecoONE® Enzyme Active Filter Booster to the filter compartment after each filter cleaning.
MAINTENANCE:
AS NEEDED: Maintain lowest recommended sanitizer level
(.5 to 3 ppm generally – follow sanitizer instructions)
WEEKLY: Clean Cartridge Filter with FilterONETM
WEEKLY (or as needed): Shock spa with ONEShockTM, dichlor or non-chlorine shock.
MONTHLY: Add ecoONE® Monthly
EVERY 3 MONTHS(or as needed): Cleanse spa with JetONETM, drain and refill.
DAILY: ENJOY! |
