HOME arrow Spa Starter Kit
Eco One Spa Treatment System - for chemical free water
Your ecoONE® 3-Month Kit contains the following:


1 Sample bottle JetONE, fast-acting, super-concentrated spa cleanser
1 8oz. FilterONE
3 8oz. bottle ecoONE® Monthly
Free 6-pack Cooler Bag Packaging!
(keep your beverages cool by the spa!)

 

WELCOME:


Congratulations on your purchase of the ecoONE® Spa Treatment System. ecoONE® is the safest, easiest and most effective water conditioner on the market today. Your spa water will be softer, cleaner and more enjoyable, with no odors, no foam and no irritation to the eyes or skin. ecoONE® is a unique, proprietary formulation of non-foaming surfactants, natural enzymes, minerals and plant extracts that contain no harsh chemicals.

 

SATISFACTION GUARANTEED:


We guarantee you will find the ecoONE® system superior over all other treatment methods on the market. If our system, used as directed, does not simplify and enhance your spa experience, return the unused portion to us within 60 days of purchase for a full refund.
Technical Support Email: This e-mail address is being protected from spam bots, you need JavaScript enabled to view it – we can very likely solve any problems you may have.

THE ecoONE® ADVANTAGE:
No more itching
No more rashes
No more scum lines
Reduce or eliminate foam
Stabilized pH and alkalinity
Increases filter efficiency; easier cleaning
Never scrub your spa again
Will not damage clothing
Naturally softens your water
Extends the life of your spa water
Leaves your skin feeling soft
Reduces and/or eliminates the majority of your spa care chemical regimen including foam reducers, pH up, pH down, clarifiers, scum digesters, filter cleaning products, chlorine/bromine, etc.
Great for indoor spas (reduces odors)
Reduction of overall maintenance.


EcoONE® QUICK START GUIDE:

 

1) Remove and clean cartridge filter with FilterONETM.

2) If necessary, use existing water to deep-cleanse your spa for 1 to 24 hours using approximately 4oz. (113g) of JetONETM Fast Acting Spa Cleanser.
BIGUANIDE NOTE: When switching from a biguanide product,
drain and refill spa before cleansing and replace cartridge filter.
NEW SPAS: New spas should be filled and cleansed before starting ecoONE® as manufacturer 'wet testing' may cause buildup of mold, or other contaminants.

3) Drain spa and rinse surfaces with fresh water. Clean spa shell and cover. (we recommend ecoONE® Shell and Liner Cleaner) Refill and drain spa 'well' (center of spa) 2 to 3 times to assure removal of all contaminants from plumbing.

NOTE: NEVER use household cleaners to clean your spa. They can damage the shell and cause foaming.

4) Refill spa and heat to operating temperature. Adjust pH, alkalinity, calcium hardness ONLY if necessary.
pH Range: 7.2 – 8.2
Alkalinity: 80 - 120
Hardness: 200+
VERY HARD or WELL WATER: Many initial water quality issues can be solved by filling your spa using the ecoONE® Spa Pre-Filter. If your water is excessively hard, you may need to use a stain and scale control product.

5) Add minimum recommended amount of sanitizer or one dissolving packet
of ONEShockTM(where available) per 250 gallons (950 liters)
(see “SANITIZERS” page: 5)

6) With jets and blowers running, add full bottle of ecoONE® monthly to spa. For heavily used spas, we recommend adding ½ to 1 cap full of ecoONE® Enzyme Active Filter Booster to the filter compartment after each filter cleaning.

 

MAINTENANCE:


AS NEEDED: Maintain lowest recommended sanitizer level
(.5 to 3 ppm generally – follow sanitizer instructions)
WEEKLY: Clean Cartridge Filter with FilterONETM
WEEKLY (or as needed): Shock spa with ONEShockTM, dichlor or non-chlorine shock.
MONTHLY: Add ecoONE® Monthly
EVERY 3 MONTHS(or as needed): Cleanse spa with JetONETM, drain and refill.
DAILY: ENJOY!


SANITIZERS


While ecoONE® eases the oxidation demand on your sanitizer it is not a registered sanitizer. Maintain the minimum recommended amount of sanitizer in your spa. This may range between .05 ppm and 3 ppm depending on your local regulatory agency guidelines.

At minimum, we recommend ozone and shocking weekly with a sanitizing shock such as ONEShockTM or dichlor.

OZONE:(Highly Recommended) Ozone is the most powerful and, arguably the safest sanitizer available. However, ozone oxidizes very quickly and does not create a 'residual' in the water. A minimum residual of chlorine should be used with ozone systems.
Use with ecoONE®: Shock weekly with ONEShockTM or dichlor per label instructions to kill any residual or resistant bacteria. May also use non-chlorine shock.

DICHLOR / ONEShockTM: (highly recommended) Highly effective and 'self-shocking,' ONEShockTM / dichlor is a balanced form of chlorine that can be used both as a sanitizing shock and residual sanitizer. When used correctly with the ecoONE® system, you will not experience chlorine smell, itching or rashes.

BROMINE: (compatible) Establish initial bromine levels per package instructions. Set floater for minimum dispersal and adjust as needed. Shock weekly with either dichlor, ONEShockTM or non-chlorine shock.

TRICHLOR: DO NOT USE (white pucks, similar in appearance to bromine) Never use trichlor as a spa sanitizer. It may damage your spa, cause respiratory issues and WILL void most spa's warranty.

BACTERICIDES / ALTERNATIVES
BIGUANIDE: (not recommended) Not tested for compatibility.

COPPER / SILVER: (compatible) Copper & silver based products are somewhat effective bactericides for spas. However, in the warm water, 'bacteria-friendly' environment of a hot tub, they should still be used with a chlorine shock such as ONEShockTM.

“ACTIVE OXYGEN:” (compatible) This is essentially non-chlorine shock being sold as a sanitizer. It is NOT a sanitizer. Works well with ozone. We recommend less expensive, non-chlorine shock instead (monosodium percarbonate or MSP).

MINERAL CARTRIDGES: (compatible, not necessary)

MAGNETS & MISC. GADGETS: mostly harmless – not sanitizers. Scientifically dubious.
SPA CARE GUIDE ALWAYS / NEVER
Simple spa care tips to “simplify your spa... naturally”

 

ALWAYS:

 

SHOWER FIRST: 

Take a quick, soap-less shower before entering your spa. This will help reduce the workload on ecoONE® and your sanitizer.

AIR IS GOOD: The introduction of oxygen in to the system enhances the efficacy of the ecoONE® system. Leave your jets and air intakes set to the “on” position between spa uses.

CLEAN YOUR FILTER. The ecoONE® system relies heavily on filtration. Regular cleaning of your cartridge filter will keep contaminants from getting back into the spa. For heavy bather load, consider using ecoONE® Enzyme Active Filter Booster.

MAINTAIN SANITIZER LEVELS: Safety first – Bacteria love a warm water environment (SEE SANITIZERS, Page: 5.)

MAINTAIN WATER LEVEL: Water should be at least 3 inches above filter intake. Low water levels will lead to cloudy water.

SPA NAKED! Clothing tends to hold residual detergent which may cause foaming. (That's our story and we're sticking to it.)

 

NEVER:


Never use household cleaning products to clean or maintain your spa. The one exception is baking soda which can be used to raise pH or scrub out stains.

 

TRICHLOR:

 

 NEVER use 'trichlor' as a sanitizer for your spa. Trichlor is intended for use in pools and can cause damage to your spa as well as cause potential respiratory issues. USE OF TRICHLOR WILL VOID MOST SPA WARRANTIES!

AVOID CHEMICAL SOUP: With proper water balance and sanitizer levels, ecoONE® will 'recover' your spa with time and good filtration. Don't overdose with additional products. 24 hours of high filtration with ecoONE® is often as effective as a heavy dose of shock.

AVOID ACCIDENTS: Make sure the little ones use the potty before getting in to the spa. Urine will irrevocably crash your spa water.

NEVER SPA ALONE: (see “Spa Naked”:) While relaxing in your spa is a relaxing and well-being-enhancing experience, it is also a potentially dangerous place. Always use common sense around spa chemicals and electrical appliances. Don't overheat your spa.

PROBLEM SOLUTION 
 Cloudy Water - clean cartridge filter with FilterONE
- shock spa with ONEShockTM, dichlor or non-chlorine shock
   (allow 24 hours for product to 'catch up' and clean filter)
- increase filtration cycle
- increase sanitizer level
- check pH (7.2 – 8.2) and alkalinity (80 – 120)
- clean cover with ecoONE® Shell and Liner Cleaner – rinse completely

 Foamy Water

                            

 Almost always caused by the introduction of soaps to the spa.
- see page 6 (Always / Never)
- follow “cloudy water” solutions
- discontinue use of filter cleansing products other than FilterONE®
- run spa with cover off and jets and blowers on full – scoop out foam.
- add two caps full ecoONE® Enzyme Active Filter Booster to filter compartment, set spa to max filtration cycle and allow product to work for 24 hours.

 

 Green Water Algae (unlikely in covered spa)
- shock spa with ONEShockTM, dichlor or non-chlorine shock
   (allow 24 hours for product to work, then clean filter)
OR
Dissolved coper present in water.
- refill spa using ecoONE® Spa Pre-filter
- use a product such as “Metal Gone” and clean filter after 24 hours

 Brown/Black/

Orange Water

Dissolved iron in water
- follow instructions for “Green Water”
OR
ecoONE® has loosened contaminant buildup in plumbing.
- on rare occasions, the JetONETM cleansing process does not completely remove all contaminants from plumbing. Cleanse spa with JetONETM, drain and refill.
 Yellow Water Generally left over from biguanide conversions.
- shock spa with ONEShockTM, dichlor or non-chlorine shock
   (allow 24 hours for product to 'catch up' and clean filter)
- If yellow water persists, you may have to repeat the JetONETM cleansing process
 Itching/Rashes - shock spa with ONEShockTM, dichlor or non-chlorine shock
   (allow 24 hours for product to 'catch up' and clean filter)
OR
- if itching or rashes persist, you may have a skin issue that requires medical attention. Most ecoONE® users find that, when used as directed, ecoONE® solves their itching and rashes – DO NOT UNDER-SANITIZE your spa – this can make the problem worse.
 Still Need Help? ecoONE® Customer Support: This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
or call: 877-492-8123

THANK YOU! And welcome to the ecoONE® family.

We hope you enjoy our one-of-a-kind ecoONE® Spa Treatment System. We at Pacific Sands, Inc. use ecoONE® in our own tubs and are inspired by the growing list of happy users and the many gracious comments that we have received.

We have a broad base of satisfied ecoONE® customers around the world ranging from the “Pirate Platoon” in Iraq who built a hot tub out of spare parts and miscellaneous junk (visit our website at www.pacificsandsinc.com for the full story) to movie stars to a house full of Las Vegas show girls.

We love to hear your feedback and comments. Please provide us with a testimonial of your experience with the ecoONE® system by writing to
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it .

We will continue to bring safe and effective products to market that reduce, if not rid, the amount of chemicals used in your home. Thank you for your valued support.

The Pacific Sands Family
ecoONE® - “Simplify Your Spa … Naturally”
Pacific Sands Inc. product support line: 877-492-8123

 
Shopping Cart
Show Cart
2 Products,
$28.90
Login Form





Lost Password?
No account yet? Register
 

Warning: fopen(/home/eclear/public_html/components/com_sef/cache/shCacheContent.php) [function.fopen]: failed to open stream: Permission denied in /home/eclear/public_html/components/com_sef/shCache.php on line 74